JESAIR ACTIVATED CARBON


Why is it used?
How does it work?
how is it applied in HVAC Applications


Designed for removal of :
* Particulates
* Gaseous Pollutants
* Odors

Odor-Guard filter Applications: * Office, retail and commercial buildings
* Apartment and lodging complexes
* industrial plant offices, laboratories and work areas
* Smoking areas, restaurants, nursing homes, pet shops, hospitals, locker, bars, print shops etc.

Bad air is unpleasant, distracting and potentially unhealthy. No matter what the reason, when indoor air smells bad, people not very happy about.

When purifying air, both particulate matter and gaseous/vaporized compounds must be removed. Activated carbon is used only to absorb materials that are in the gaseous or vaporized stat: materials that cannot be removed by particulate filters. Activated carbon has proven itself to be the most effective means of odor and pollution control available because of its high affinity for a broad spectrum of chemical compounds.

Gas molecules will disperse (mix) themselves evently throughout a given area in accord with the perfect gas laws. Activated carbon will attract and absrob the odor or pollutant molecules to which it is closest, causing an unequal mixture to result. Whereupon the gases will redistribute themselves, the carbon will absorb the closest, and process will continue until the air is "cleaned" or the carbon reaches its capacity.

These filter medias are available in rolls , pads and with G.I. frame & G.I mesh retainers.

JESAIR Activated Carbon Impregnated Media for Room Purifiers, Heating, Ventilation,
Air Conditioning Filters and other odor removal applications

JESAIR provides the effective solution for removal of noxious odors. Gases, and other airborne contaminants which are trapped in modern "tight building" construction methods. "Active filter" a specialized process, whereby synthetic materials are impregnated with activated carbon, addresses the problems and potential health risks associated with poor air quality.

Typically applied, Active filter serves as the downstream (exhaust) face of the filter while conventional synthetic or glass media is retained on the upstream side for maximum particulate removal.

Selected Product Specifications:

ACTIVE FILTERII PRODUCT DESIGNATION ACF-NWPE-7.0 0-150
Air flow SUBSTRATE WEIGHT OZ/YD² 7
PERCENT ADD ON CARBON 150
CARBON LOADING OZ/DY² 10.5
NOMINAL THICKNESS (INCHES) +/- 10% 5/8
NOMINAL CFM@0.5" PRESSURE DROP (+/- 10%) 900
APPROXIMATE DIAMETER & LENGTH OF COADTED ROLL 26"/30yds
APPROXIMATE WEIGHT OF COATED ROLL LBS 47

Tested in accordance with A.S.H.R.A.E standard 52-76
above data represents only a partial listing of available coated media.

Page 1 || Page 2